Fuse Link Manufacturer & Supplier | Reliable Replacement Fuse Links for Dropout Fuse Cutouts
High-voltage expulsion fuse links serve as precision overcurrent protection elements installed inside outdoor drop-out fuse tubes. Upon experiencing persistent overload or short-circuit faults, the fusible element melts instantaneously, triggering an internal arc-extinguishing expulsion process that isolates the faulty line. Standardized for reliable time-current coordination, these fuse links protect distribution transformers and overhead lines from severe electrical damage.
Type K (K-Link / Fast): Fast-acting fuse links providing rapid fault clearing for aggressive short-circuit isolation.
Type T (T-Link / Slow): Slow-acting fuse links designed for superior coordination with upstream reclosers and protective relays.
Removable Buttonhead: Features a detachable top threaded terminal fitting standard 100A/200A fuse holders.
Solid / Universal Buttonhead: Integrated single-piece terminal head for high mechanical pull-strength applications.
Technical Specifications
|
Parameter |
Specification Range |
|
Rated Voltage |
11kV - 38kV |
|
Rated Current Range |
1A - 200A (Type K and Type T) |
|
Tensile Strength |
>= 45N (Permanent tension without elongation) |
|
Conductor Materials |
High-strength tinned copper, silver-plated copper, or fusible alloy elements |
|
Leader Material |
Flexible tinned copper braided wire / stranded copper cable |
|
Operating Temperature |
-40 deg C to +85 deg C |
|
Standard Compliance |
IEC 60282-2, ANSI/IEEE C37.42, NEMA SG2 |
Applications & Operating Conditions
Primary Applications
Internal core element for 10kV to 33kV outdoor drop-out fuse cutouts.
Overcurrent and short-circuit protection for pole-mounted distribution transformers.
Operating Environment
Designed for outdoor hermetically sealed fuse tubes exposed to heavy ambient temperature fluctuations (-40 deg C to +55 deg C).
High humidity and coastal salt-mist environment adaptability through corrosion-resistant lead wires.
Materials & Key Performance
Fusible Element Design: Precision-calibrated dual-material element combining high-conductivity strain wire (tinned copper/silver alloy) with tension-relieved solder joints to ensure exact time-current characteristic curves.
Tensile Strength & Crimping: Mechanically swaged terminal crimps withstand high pre-tension forces from upper cutout contact springs, preventing premature mechanical fatigue or wire snapping prior to actual fault conditions.
Arc Quenching Contribution: Paired with internal fuse tube liners to instantly vaporize and generate high-pressure deionizing gas when fault currents pass through the melting section.

Manufacturing & Quality Control
Calibration & Resistance Testing
Automated micro-ohm resistance sorting benches verify that every fuse link matches strict electrical resistance thresholds before packaging.
Tensile Proof Testing
100% mechanical pull-force testing applied to ensure leader-to-element joints exceed minimum operational load specifications.
Time-Current Characteristic (TCC) Verification
Sample-batch destructive testing performed in high-current laboratories to validate melting time curves against IEC/IEEE standards.
Anti-Oxidation Treatment
Tinned and silver-coated copper leads undergo anti-corrosion passivation baths to prevent surface darkening during long-term warehouse storage.
Customization & OEM/ODM
Leader Length Variations
Customizable flexible leader lengths and stripped wire ends tailored to non-standard or oversized cutout tube dimensions.
Special Ampere Ratings
Tailored low-ampere or non-standard intermediate rating calibration (e.g., fractional amp ratings) for specialized utility requirements.
Packaging & Labeling
Customized barcoded box labeling, individual polybag separation, and utility-specific part number printing.
Packaging & Delivery
Packaging Structure
Packed in moisture-resistant individual paper sleeves or anti-static sealed polyethylene bags, bundled in sturdy corrugated cartons with protective foam dividers to prevent physical tangling or bending of flexible leads.
Moisture Barrier
Desiccant packs included inside master cartons to prevent oxidation and moisture absorption during maritime transit.
Lead Time
10 - 20 days for standard volume orders; immediate stock dispatch available for regular rating series.
ISO Certificates




FAQ

Request a Quote
To receive a technical proposal, time-current characteristic curves, or commercial quotation for your fuse link requirements, please provide:
Rated Amperage & Characteristic Type (Type K / Type T)
Buttonhead Style (Removable / Solid)
Required Standards (IEC / IEEE) & Order Quantity
Contact our engineering sales team directly at sale@gao-dian.com.
Gaodian Technology Co., Ltd. is one of the most experienced fuse link manufacturers and suppliers in China. We warmly welcome you to buy customized fuse link made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
fuse link, Fuse Link Type K, Fuse Link Type T





